Print
Modes
Fast Draft:
530 cps
Draft:
400 cps
Fast Draft/High Impact:
250 cps
High Impact:
200 cps
Letter Quality:
100 cps
Optical Quality:
65 cps
Graphics:
5,000 dps
Character Matrix
Fast Draft:
9 x 9 cell
Draft:
12 x 9 cell
Letter Quality:
24 x 18 cell
Optical Quality:
36 x 18 cell
Printhead
18 wire parallel array.
Printhead Adjustment
Automatic gap adjustment is standard.
Character Sets
Fast Draft, Draft and Letter Quality for Epson™ and IBM®
Proprinter. Optical Quality for OCR-A and OCR-B.
Character Spacing
5, 6, 6.7, 7.5, 8.4, 8.6, 10, 12, 13.3, 15, 16.7, 17.1 and
20 cpi.
Line
Length
85 characters at 10 cpi. Also software programmable.
Line
Spacing
6 and 8 lpi.
Paper Handling
Zero Tear-Off distance; paper out/paper jam detection;
fanfold, continuous forms, edge punched.
Continuous Mode
Automatically loads paper from another tractor if paper out
condition occurs. Only available in model 852si.
Operator Controls
Normal Operating Mode:
Online, Form Feed/Load and Form Select/Unload.
Form
Parameters
Non-volatile memory for ten forms, each supporting settings
for: tractor path, cpi, lpi, form length, left and right
margins, top and bottom margins, unidirectional printing,
slashed or non-slashed zero, language, font, high-impact
on/off, form name.
Ribbon
Cartridge:
nylon fabric, mobious loop, approximately 15 million
characters.
Operating Indicators
LED indicates Online/Fault/Setup; 2 x 16 LCD for form
selection; on/off line status and error descriptions.
Power Requirements
Voltage:
100 to 250 VAC ±10%
Frequency:
50 to 60 Hz
Power Consumption:
18W non-printing, 60W printing.
|
Paper
Slew Rate
Model 850/850si:
6 ips rear feed
Model 852si:
up to 12 ips bottom feed
Paper Width
2.5 to 9.75 inches (6.4 to 24.8 cm).
Paper Loading
Model 850/850si:
Rear feed.
Model 852si:
Rear feed and straight through bottom feed.
Multi-Part Forms
Model 850:
1 to 5 parts; 0.025" max. thickness
Model 850si/852si:
1 to 9 parts; 0.025" max. thickness
Graphics
Density
60 to 240 dpi horizontally x 72 dpi vertically.
Audible Noise (Draft Mode)
60 dBA.
Setup (Automatic Methods)
Control panel, pluggable cloning module or remote via
Windows program.
I/O Buffer
32k.
Standard Interfaces
Parallel:
Centronics compatible.
Serial:
RS232, 300 to 9,600 baud.
Optional Interfaces
Ethernet.
Software Controls
Emulation choice of Printek, Epson FX¨, IBM Proprinter, DEC
LA120/210, Genicom ANSI (includes 20 popular bar codes) or
Basic Bar Codes (includes Code 39, 2 of 5, Interleaved 2 of
5).
Physical Specifications
H x W x D:
7"x 18.5"x 17"
(17.8 cm x 47 cm x 43.2 cm)
Second tractor on model 852si adds 3.5" (8.9cm) to height.
Weight: 32 lbs. (16.9 kg)
Second tractor on model 852si
adds 10 lbs. (5.3 kg) to the weight.
Reliability
Model 850:
MTBF - 10,000 hours on electronics, with 50% duty cycle.
Model 850si/852si:
MTBF - 10,000 hours on electronics, with 100% duty cycle.
Printhead Life:
500 million characters.
Warranty:
One-year printer warranty, two-year limited printhead
warranty when Printek brand ribbons are used; one-year
warranty when non-Printek brand ribbons are used.
* Note: If
you plan to do continuous feed print jobs with any of the
PrintMaster 850 Series printers, we recommend that you
purchase the optional Paper Guide .
Information
Copyright © 2001 Printek, Inc.
Thanks to
Printek, Inc. for this page format and information. |
